Material

• Coupling: Anodised Aluminium alloy A2017.
• Setscrew: SCM435, Black oxide coated (may be replaced with Stainless Steel).

Performance

• Maximum Operating Temperature: 100°C. (approx.)

Features

• Suitable for stepper motors.
• One-piece metallic spring coupling.
• Zero backlash.
• Absorption of parallel & angular misalignments and shaft end-play by spring action.
• Parallel misalignment not absorbed.
• High torsional stiffness and response.
• Identical clockwise & anti-clockwise rotational characteristics.
• Maintenance-free, oil and chemical resistant.

Options

• MWS couplings can be bored out.
• Finished products with two different end-bore diameters are available.

Other Info.

• All MWS couplings are supplied with 2 setscrews per hub (except those with a 4mm diameter bore or less which have only 1 setscrew).
• Recommended tolerance on shaft diameters is h6 and h7.
• Non-standard bores and keyways are available on request.
• Important: Couplings and other rotational parts should be protected by covers for safety operation. Also, take note that operation under misalignment exceeding maximum values and excessive torque may result in shorter life of the coupling due to plastic deformation.

Notes:
The maximum torque is two-fold of the rated torque. Select a type in which torque generated during continuous operation does not exceed the rated torque of the coupling.
Moment of inertia and mass figures based on the maximum shaft bores.