<div class="full-description">
    <p><strong>Material</strong>
<ul>
  <li><strong>Shafts &amp; Ends</strong>: Stainless Steel.</li>
  <li><strong>Core</strong>: Supplied with plastic covered sheathing.</li>
</ul>
<p><strong>Options</strong>
<ul>
  <li>Custom lengths, both longer and shorter, can be manufactured.</li>
  <li>Couplings to suit your requirements can be manufactured from Steel, Stainless Steel, ferrous and non-ferrous materials.</li>
  <li>Higher rated torque shafts are available.</li>
  <li>Alternative bore sizes and types are available, e.g. keyways, hex sockets, bi-squares.</li>
</ul>
<p><strong>Accessories</strong> </p>
<ul>
  <li><strong>'P' Clips</strong>: Used to provide restraint to longer Masterflex shafts in areas where differential movement is not required or to restrict to a particular section of shaft. Stainless Steel 'P' clips available on request.</li>
  <li><strong>Rigid Metallic Tubes</strong>: Formed rigid metallic tubes from a variety of materials and with end terminations (connections) to suit your needs from DIY to aerospace.</li>
  <li><strong>Springs / Casing Protectors</strong>: Where a shaft assembly has a long unsupported length, an external spring around the casing can ease teh strain at the flexible to rigid interface and provide a more gradual transition. Can also be used to protect the casing from adjacent equipment which may contact and cause abrasion or serves as a heat sink to take heat away from a local heat source. </li>
  <li>Supplied in chemically blackened or bright zinc coated mild steel.</li>
</ul>
<p><strong>Length Tolerances</strong> </p>
<ul>
  <li> 300mm to 1500mm = ±1.5mm</li>
  <li>1501mm to 3000mm = ±3.0mm</li>
  <li>3001mm to 5000mm = ±5.0mm</li>
</ul>
</div>