<div class="full-description">
    <p><strong>Material</strong></p>
<ul>
<li><strong>Hubs</strong>: RTE-SL: Steel 11SMn30C.</li>
<li><strong>Hubs</strong>: RTE-SS-19, 28 &amp; 42: Stainless Steel 303 X10CrNiS 18-9 (Wr 1.4305).</li>
<li><strong>Hubs</strong>: RTE-SS-24, 38 &amp; 48: Stainless Steel 316 X6CrNiMoTi 17-12-2 (Wr 1.4571).</li>
<li><strong>Flexible Spider Insert</strong>: Orange 92 Shore A (T-PUR&reg;), Purple 98 Shore (T-PUR&reg;), Green 64 Shore D (T-PUR&reg;). PA and PEEK spiders also available.</li>
<li><strong>Operating Temperature Range</strong>: -50&deg;C to +120&deg;C (-50&deg;C to +150&deg;C short term).</li>
</ul>
<p><strong>Features</strong></p>
<ul>
<li>Hubs from steel, specifically suitable for drive elements subject to high loads, e.g. steel mills, elevator drives, spline hubs, etc.</li>
<li>Torsionally flexible, maintenance-free, vibration-damping.</li>
<li>Axial plug-in, fail-safe.</li>
<li>All over machining - good dynamic properties.</li>
<li>Compact design/small flywheel effect.</li>
<li>Finish bore according to ISO fit H7, feather keyway according to DIN 6885 sheet 1-JS9.<br /> <strong>Note</strong>: Imperial bore sizes will be supplied with their corresponding standard imperial keyway (BS 46 part 1 square).</li>
<li>Approved according to EC standard 94/9/EC.</li>
</ul>
</div>