<div class="full-description">
    <p><strong> Material</strong>
<ul>
  <li>Plastic iglidur® W300 which offers especially long service life.</li>
  <li> Low coefficient of friction.</li>
  <li>Extremely high wear resistance and good resistance to dirt.</li>
</ul>
<p><strong>Performance</strong></p>
<p><strong>Density</strong>: 1.24g/cm3. <strong>Max Moisture Absorption at 23°C/50% r.h.</strong>: 1.3% of weight. <strong>Max Moisture Absorption</strong>: 6.5% of weight. <strong>Max Dry PV Value</strong>: 0.23 MPa • m/s. <strong>Modulus of Elasticity</strong>: 3,500 MPa. <strong>Tensile Strength at +20°C</strong>: 125 MPa. <strong>Compressive Strength</strong>: 61 MPa. <strong>Shore D Hardness</strong>: 77. <strong>Max. Long Term Application Temp.</strong>: +90°C. <strong>Max. Short Term Application Temp.</strong>: +180°C.<strong> Min. Application Temp</strong>.: -40°C.<strong> Thermal Conductivity</strong>: 0.24 W/m•K. <strong>Coefficiant of Thermal Expansion at +23°C</strong>: 9 K-1 • 10-5. <strong>Specific Volume Resistance:</strong> &gt;1013 Ωcm. <strong>Surface Resistance:</strong> &gt;1012 Ω.</p>
<p><strong>Options</strong></p>
<ul>
  <li>Some sizes available in iglidur® A180 FDA approved material on request.</li>
  <li>Anti-Backlash nuts available.</li>
</ul>
</div>