Material

• Plastic iglidur® J which offers low wear and low coefficients of friction running dry.
• Vibration damping.
• Good chemical resistance and low moisture absorption.

Performance

Density: 1.49g/cm3. Max Moisture Absorption at 23°C/50% r.h.: 0.3% of weight. Max Moisture Absorption: 1.3% of weight. Max Dry PV Value: 0.34 MPa • m/s. Modulus of Elasticity: 2,400 MPa. Tensile Strength at +20°C: 73 MPa. Compressive Strength: 60 MPa. Shore D Hardness: 74. Max. Long Term Application Temp.: +90°C. Max. Short Term Application Temp.: +120°C. Min. Application Temp.: -50°C. Thermal Conductivity: 0.25 W/m•K. Coefficiant of Thermal Expansion at +23°C: 10 K-1 • 10-5. Specific Volume Resistance: >1013 Ωcm. Surface Resistance: >1012 Ω.

Options

• Some sizes available in iglidur® A180 FDA approved material on request.
• Available in shorter lengths.
• Anti-Backlash nuts available.