<div class="full-description">
    <p><strong>Material</strong></p>
<ul>
<li>Bearings: Carbon Steel.</li>
</ul>
<p><strong>Performance</strong></p>
<p><strong>Operating Temperature Range</strong>: -20&deg;C to +80&deg;C</p>
<p><strong>Other Info.</strong></p>
<p>Supplied without integral wipers<br /> (1) For rated travel life of 100km. For longer travel lives, reduce load to W x (100/Life)0.33 where (km) is the required travel life. Do not exceed the Dynamic Load Rating for travel life of less than 100km.<br /> (2) The load Limit is the maximum load that may be applied to a bearing/shaft. It is important to analyse the application so that peak and/or shock do not exceed the Load Limit.<br /> (3) The load capacities W. and WR are valid for a resultant load applied at 90&deg; with the ball tracks orientated as shown in the polar graphs. If the resultant acts along another direction, the appropriate multiplicative correction factor KO, should be applied to W and WR respectively.<br /> Open type bearings have reduced load capacities when used in pull-off situations.<br /> (4) Internal bearing diameter is affected by the housing bore.<br /> (5) Hole for anti-rotation pin is below centreline.</p>
<p><strong>Notes</strong>:<br /> For a corrosion resistant bearing add suffix CR to the part number and reduce the load capacity by 30%.<br /> Add suffix W for one or WW for two integral wipers. P.O.A.</p>
<p>* A trademark of Thomson Industries Inc. Thomson is registered in the U.S. Patent and Trademark Office and in other countries. BALL BUSHING is a registered Community Trademark.</p>
</div>