Close
All Categories
    Filters
    Preferences
    Search

    Ondrives

    Ondrives design and manufacture precision gears and gearboxes gear reducers in the UK at our specialised gear factory.

    View as Grid List
    Sort by
    Display per page
    Ondrives Precision Gears and Gearboxes Part number  294-111-100

    294-111-100

    294-111-100
    Splined Steel Shaft, DIN 5463 14-54mm Diameter
    Ondrives Precision Gears and Gearboxes Part number  BFM204

    BFM204

    BFM204
    Flanged Trapezoidal Nut with Mounting Holes, 1 Start Bronze Right Hand Thread
    Ondrives Precision Gears and Gearboxes Part number  BLHT40-2AR

    BLHT40-2AR

    BLHT40-2AR
    Spiral Bevel Gearbox Right Angle Shaft Input 2 Shaft Outputs, ≤10' backlash, 10mm shafts, 3.00Nm-8.00Nm output torque, ratio 2:1
    Ondrives Precision Gears and Gearboxes Part number  EAS24-10

    EAS24-10

    EAS24-10
    Slip-Ease Friction Clutch with Adjustable Torque, Enclosed Plate Design
    Ondrives Precision Gears and Gearboxes Part number  FS4X6

    FS4X6

    FS4X6
    Precision Stainless Steel Spring Washers. For Pre-Loading Bearings.
    HTD Timing Belts and Pulleys from Ondrives UK precision gear and gearbox manufacturer

    HTD-300-5M/25

    HTD-300-5M/25
    HTD Synchronous Heavy Duty Rubber Endless Timing Belt, 5mm Pitch, 25mm Belt Width
    Ondrives Precision Gears and Gearboxes Part number  HU816C

    HU816C

    HU816C
    Double Steel Universal Joint, Hardened Pin
    Ondrives Precision Gears and Gearboxes Part number  KK2-20

    KK2-20

    KK2-20
    Steel Rounded End Feather Key, 2mm x 2mm x 20mm
    Ondrives Precision Gears and Gearboxes Part number  LFM184

    LFM184

    LFM184
    Trapezoidal Rolled Leadscrew, 1 Start Steel Right Hand Thread, 1 Metre Length
    Ondrives Precision Gears and Gearboxes Part number  LFM204

    LFM204

    LFM204
    Trapezoidal Rolled Leadscrew, 1 Start Steel Right Hand Thread, 1 Metre Length
    Ondrives Precision Gears and Gearboxes Part number  NTM2-4

    NTM2-4

    NTM2-4
    Nylon Tipped Stainless Steel Set Screw, M2 x 4mm
    Ondrives Precision Gears and Gearboxes Part number  NTM3-4

    NTM3-4

    NTM3-4
    Nylon Tipped Stainless Steel Set Screw, M3 x 4mm
    Ondrives Precision Gears and Gearboxes Part number  NTM4-5

    NTM4-5

    NTM4-5
    Nylon Tipped Stainless Steel Set Screw, M4 x 5mm
    Ondrives Precision Gears and Gearboxes Part number  NTM4-7

    NTM4-7

    NTM4-7
    Nylon Tipped Stainless Steel Set Screw, M4 x 7mm
    Ondrives Precision Gears and Gearboxes Part number  P12-5M-25F

    P12-5M-25F

    P12-5M-25F
    HTD Synchronous Heavy Duty Timing Pulley, 5mm Pitch, To Suit 25mm Wide Belts
    Ondrives Precision Gears and Gearboxes Part number  P24-5M-25F

    P24-5M-25F

    P24-5M-25F
    HTD Synchronous Heavy Duty Timing Pulley, 5mm Pitch, To Suit 25mm Wide Belts
    Wormwheel gearbox shaft input with bore output made by Ondrives Precision Gears and Gearboxes

    P30-120

    P30-120
    Precision worm gear reducer, ≤30' backlash, shaft input, 8mm output bore & 6mm input shaft, 3.40Nm-6.70Nm output torque, 30mm centres, ratio 120:1
    Wormwheel gearbox shaft input with bore output made by Ondrives Precision Gears and Gearboxes

    P45-10

    P45-10
    Precision worm gear reducer, ≤30' backlash, shaft input, 12mm output bore & 10mm input shaft, 10.30Nm-39.90Nm output torque, 45.5mm centres, ratio 10:1
    Wormwheel gearbox shaft input with bore output made by Ondrives Precision Gears and Gearboxes

    P45-20

    P45-20
    Precision worm gear reducer, ≤30' backlash, shaft input, 12mm output bore & 10mm input shaft, 12.20Nm-40.00Nm output torque, 45.5mm centres, ratio 20:1
    Ondrives Precision Gears and Gearboxes Part number  P45-X

    P45-X

    P45-X
    Single extension gearbox shaft, diameter 12mm, overall length 88.1mm
    Ondrives Precision Gears and Gearboxes Part number  PF20-20NM

    PF20-20NM

    PF20-20NM
    Precision worm gear reducer, ≤30' backlash, Nema 17 flanged input, 6mm output bore & 5mm input bore, 1.70Nm-4.90Nm output torque, ratio 20:1
    Ondrives Precision Gears and Gearboxes Part number  PF20-30NM

    PF20-30NM

    PF20-30NM
    Precision worm gear reducer, ≤30' backlash, Nema 17 flanged input, 6mm output bore & 5mm input bore, 1.90Nm-5.00Nm output torque, ratio 30:1
    Ondrives Precision Gears and Gearboxes Part number  PF20-60NM

    PF20-60NM

    PF20-60NM
    Precision worm gear reducer, ≤30' backlash, Nema 17 flanged input, 6mm output bore & 5mm input bore, 2.10Nm-5.00Nm output torque, ratio 60:1
    Ondrives Precision Gears and Gearboxes Part number  PF40-60ANM

    PF40-60ANM

    PF40-60ANM
    Precision worm gear reducer, ≤8' backlash, Nema 23 flanged input, 10mm output bore & 6.35mm input bore, 7.20Nm-18.00Nm output torque, ratio 60:1
    Ondrives Precision Gears and Gearboxes Part number  SKM204

    SKM204

    SKM204
    Hexagonal Trapezoidal Nut, 1 Start Steel Right Hand Thread

    Ondrives

    Filter by Clear All
    Min: Max:
    Min: Max:
    Min: Max:
    Min: Max:
    Min: Max:
    Min: Max:

    Filter by:

    Gear Tooth Type
    Pulley or Belt
    Sprocket or Chain
    Belt Width
    Cube size mm
    Material
    Pulley Tooth
    Shaft dia. mm Ø k6
    Design
    Thread [d]
    Thread Ø
    Shoulder Diameter
    Shoulder Length
    Gear Ratio [i=]
    Centre Dist. [a]
    Output Torque T₂max [Nm]
    Nom Output Torque T₂n [Nm]
    Output Torque T₂n [Nm]
    Accessories
    Dimension [s]
    Adjustable Overload Torque TKN (Nm)
    Output Backlash j arcmin
    Bearing Size
    Bearing Style
    Belt Length
    Bore Diameter mm Ø H7
    Bore Diameter [A]
    Bore Diameter [B]
    Bore Diameter [B] H7
    Bore Diameter [B] H8
    Bore Diameter [B2]
    Bore Diameter [d]
    Bore Diameter [D] H7
    Bore Diameter [di]
    Bore Diameter [di] H7
    Bore Diameter [di] H6
    Bush Type
    Capacity at 50 rpm (Nm)
    Carriage Design
    Carriage Size
    Centre Distance [a]
    Coupling Size
    Diameter
    Diameter [B]
    Diameter [B] ±0.01
    Diameter [D] h6
    Dimension [L]
    Extension
    Fixing Type
    Helix Direction
    Hole Spacing
    Housing Style
    Hub Type
    Input Bore Ø
    ISO No.
    Joint Configuration
    Keyway
    Length
    Link Type
    Locking Nut
    Load Rating
    Max. Bore Diameter
    Max. Bore Diameter [B]
    Max. Bore Diameter [d1]
    Max. Bore Diameter [D1] H7
    Max. Bore Diameter [d1] & [d2]
    Max. Bore Diameter [D1] & [D2]
    Max. Bore Diameter [D1] & [D2] H7
    Max. Bore Diameter [D1] & [D2] H8
    Max. Stroke
    Max. Torque (1) Nm
    Max. Torque (Nm)
    Min. Bore Diameter [D1] & [D2] H7
    Spline Module mn
    Normal Module mn
    Axial Module mx
    No. of Spline Teeth
    No. of Starts
    No. of Starts worm [z1]
    No. of Teeth [z]
    Nut Style
    Outside Diameter
    Peak Torque (Nm)
    Pitch/Lead
    Prevailing Torque [Nm]
    Rail Size
    Ref. Diameter [dB]
    Ring Profile
    Root Diameter
    Seals
    Series
    Shaft Diameter
    Shaft Rating
    Shaft Rotation
    Shaft Style
    Shape
    Shore Hardness
    Spline Din 5480 Gears
    Spline DIN 5480
    Stud Dia.
    Stud Dia. [y]
    Lead Direction
    Thread [d]
    Tip Diameter
    To Fit KMK Lock Nut
    To Fit KMT Lock Nut
    To Fit Shaft Dia.
    Taper Bush
    To Suit Carriage
    To Suit Chain
    To Suit Joint Ø
    To Suit Rail
    To Suit Screw Jack
    To Suit Thread [d]
    Torque (Nm)
    Torque Capacity Nm (0-3200 min-¹)
    Torque Capacity Nm (3201-5000 min-¹)
    Torque T₂ [Nm] n1 100 r/min