Close
All Categories
    Filters
    Preferences
    Search

    UPHGS2.0-29LPH

    2.0 Module 17-4PH Stainless Steel (38-40HRC) 15 deg. Left Hand Helix Splined Ground Parallel Helical Gears 20 deg. PA Quality Grade 4f24 DIN 3961/3967
    SKU: UPHGS2.0-29LPH
    RFQ Delivery: -
    Product specifications
    Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
    Quality DIN 3961 DIN39674f24
    Gear Tooth TypeHelical Ground
    Helix DirectionLeft Hand
    Helix Angle15°
    Normal Module mn2
    Pressure Angle20°
    No. of Teeth [z]29
    Torque T₂ [Nm] n1 500 r/min146.64
    Ref. Diameter [d]60.05
    Spline Din 5480 GearsN25x1.25x30x18x9H
    Tip Diameter [da]64.05
    Hub Diameter [BD]45
    Backlash (mm) jt.i (min)0.028
    Backlash (mm) jt.e (max)0.102
    Inertia [I] kgm²2.49 x 10-4
    Mass kg0.531

    DIN 5480 splined bores.
    DIN 3967 tooth thickness tolerance.
    DIN 867 1.25/0.20/1.00 ground flanks and root.

    DIN 5480 N - Internal Spline Hub with 9H Tolernace
    DIN 5480 W - External Spline Shaft with 8f Tolerance
    One of each above would mate with these tolerances with a slide-fit.

    *
    *
    *
    *

    DIN 5480 splined bores.
    DIN 3967 tooth thickness tolerance.
    DIN 867 1.25/0.20/1.00 ground flanks and root.

    DIN 5480 N - Internal Spline Hub with 9H Tolernace
    DIN 5480 W - External Spline Shaft with 8f Tolerance
    One of each above would mate with these tolerances with a slide-fit.

    Product specifications
    Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
    Quality DIN 3961 DIN39674f24
    Gear Tooth TypeHelical Ground
    Helix DirectionLeft Hand
    Helix Angle15°
    Normal Module mn2
    Pressure Angle20°
    No. of Teeth [z]29
    Torque T₂ [Nm] n1 500 r/min146.64
    Ref. Diameter [d]60.05
    Spline Din 5480 GearsN25x1.25x30x18x9H
    Tip Diameter [da]64.05
    Hub Diameter [BD]45
    Backlash (mm) jt.i (min)0.028
    Backlash (mm) jt.e (max)0.102
    Inertia [I] kgm²2.49 x 10-4
    Mass kg0.531
    Product tags