Close
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Ondrives

    Z-10-1000B

    Stainless Steel Hardened and Ground Linear Shafting for use with Linear Bearings, 3-30mm Diameter
    SKU: Z-10-1000B
    RFQ Delivery: -
    Product specifications
    Shaft StyleUndrilled
    MaterialStainless Steel 57 HRC (440C)
    Diameter [D] h610
    Tolerance [μm] h60/-9
    Length1000
    Length Max.4500
    Mass kg0.601
    Depth of Hardening0.4

    Material

    • X90 CrMo18 (W.Nr. 1.4112) Resist. Stainless Steel 57 HRC (440C)

    Performance

    Surface Finish: <0.30μm Ra. Straightness: 0.10mm/m

    Other Info.

    Special ceramic shafting available in small diameters and lengths: ZrO2 (1200 Hv) and Al2O2 (2000 Hv) featuring high hardness, high temperature use and chemical resistance.
    Ø3mm through to Ø60mm inclusive (all tolerances and sizes) larger diameters on request.
    A large range of carbon ground steels (eg. EN8 and En1A) Ø4mm through to Ø100 mm available plus alloys, exotic stainless steels, aluminum and nylon.
    Linear shafting designed to be used with our linear bearings; LB, LBE, LSP, LSB, LSTB, etc.

    Note: When the shafting is to be used under extremely corrosive conditions, it is recommended that 304 or 316 Stainless shafting is used.

    *
    *
    *
    *

    Material

    • X90 CrMo18 (W.Nr. 1.4112) Resist. Stainless Steel 57 HRC (440C)

    Performance

    Surface Finish: <0.30μm Ra. Straightness: 0.10mm/m

    Other Info.

    Special ceramic shafting available in small diameters and lengths: ZrO2 (1200 Hv) and Al2O2 (2000 Hv) featuring high hardness, high temperature use and chemical resistance.
    Ø3mm through to Ø60mm inclusive (all tolerances and sizes) larger diameters on request.
    A large range of carbon ground steels (eg. EN8 and En1A) Ø4mm through to Ø100 mm available plus alloys, exotic stainless steels, aluminum and nylon.
    Linear shafting designed to be used with our linear bearings; LB, LBE, LSP, LSB, LSTB, etc.

    Note: When the shafting is to be used under extremely corrosive conditions, it is recommended that 304 or 316 Stainless shafting is used.

    Product specifications
    Shaft StyleUndrilled
    MaterialStainless Steel 57 HRC (440C)
    Diameter [D] h610
    Tolerance [μm] h60/-9
    Length1000
    Length Max.4500
    Mass kg0.601
    Depth of Hardening0.4